Latest mild steel door Tenders | Government mild steel door Tenders

CTN :45419876

16 Jun, 2026 NA

Sonitpur - Assam

Tender For bid to ras supply of tail gate clutch assembly , oil filter , assembly fuel filter , wiper motor , horn assembly high , horn high tone , horn low tone , oil seal , filter element intake air cleaner

State Government

CTN :45415605

17 Jun, 2026 3.22 Crore

Jummu - Jammu And Kashmir

Tender For corrigendum : reconstruction/repair of civil structures and laying of damaged rising main and distribution at various locations under sassci work wise details given annexure i - restoration works of jal shakti (phe) city division no.i including reconstruction / repair of civil structure and laying of damaged rising main and distribution at various locations uinder sasci (phe sector). name of works:a.restoration of rising main and washed away supports of 8" rising main in lower roop nagar. b.damage of compound wall at tibba section of sub- division dhounthly. c.constuction of main gate / barbed wire fencing / road/ wall damaged near gsr 22.50 lacs glns at lohar station. d. restoration of boundary wall, roof and floor of the pump room building at phase iind muthi pumping station. e. improvement / restoration of damage chain link fencing around intake structure at cps nai muthi. f. construction of protection work to protect tube well and pump room at muthi left and muthi 6 and muthi 7 tube well at cps nai basti. g. providing and laying damage rising main at tube well muthi left, tube well no.6 and tube well no.7 nai basti at cps nai basti. h. repairement of the tube well buildings at muthi left, muthi 6, muthi 7 and cps naibasti. i. raising of udheywala station and construction of manifold and allied works of welding at tube well no.5 udheywala and suryavanshi nagar station of sub-division muthi. j. uplifting the central pumping station samadhian by way of shifting civil, electromechanical infrastructure of sub-division dhounthly under phase 1st. k. uplifting the central pumping station samadhian by way of shifting civil, electromechanical infrastructure of sub-division dhounthly under phase 2nd. l. uplifting the central pumping station samadhian by way of shifting civil, electromechanical infrastructure of sub-division dhounthly under phase 3rd. m. construction of 200000 glns sump tank at cps samadian. n. shifting of pipe utiliies at brick klin tube well and its allied works. o. reconstruction / repairment of bath room at sub-division dhounthly and muthi. p. restore the front area by way of laying paver blocks at cps gujjar nagar. q. erection of truss over the damage roof top central pumping station cps muthi goan. r. erection of truss over the damage roof top central pumping station and dismentaling of staff qtr at station cps gujjar nagar. s. reconstruction of damage operator qtr at cps gujjar nagar under dhounthly sub-division.

State Government

CTN :45519551

23 Jun, 2026 2.09 Lacs

Hoshangabad - Madhya Pradesh

Tender For providing with fitting work of galvanizes steel core wire rope 6x36x26 of emergency gate no 1 of tawa lbmc intake of tawa dam

State Government

CTN :45532680

23 Jun, 2026 16.16 Lacs

Hoshangabad - Madhya Pradesh

Tender For pre-mansoon repair and maintenance work of mechanical dam including oiling,greasing, servicing and wire rope compounding work of radial gates, lbmc intake gate machineries for the year 2026-27

CTN :45399903

19 Jun, 2026 7.53 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : supply of printed stationery items at stps, suratgarh. - pay bill gazzetted (pad of 100 sheet) , orderly and thermal allowance (pad of 100 sheet) , pl application form (pad of 100 sheet) , absentee statement (pad of 100 sheet) , covering letter (pad of 100 sheet) , hr performa (pad of 100 sheet) , pcb voucher (pad of 100 sheet) , nac (not available certificate) (pad of 100 sheet) , acr form for tech staff (pad of 100 sheet) , ot decleration sheet (pad of 100 sheet) , medical reimbursement(pad of 100 sheet) , fvc form (pad of 100 sheet) , indent book cos-17-18 , field register (of 100 sheet) , ot book in triplicate , receipt register (of 100 sheet) , dispatch register (of 100 sheet) , stock register 370 p+15 index , stock register 170 p+ 15 index , vehicle driver log (book of 100 sheet) , c-1 register (size20"x15") (register of 100 sheet) nge , peon book (size 8.5"x6.75") (book of 100 sheet) , c-2 register (size 10"x15") , mrc register(of 100 sheet) , ta bill form (gazetted) (pad of 100 sheet) , pcb , c-5 , register , defect log book (of 100 sheet) , permit issue register (of 100 sheet) , attendance register size 10"x15" (of 14 sheet) , cash book register , work identification memo book , electricity no-dues certificate (of 100 sheet with dublicate copy, book no and page no. , memo for payment , cash book of account , journal voucher (emd to sd convertation) , journal voucher (adjustment) , card sheet for monthly payment for each work order (pink , service book (100 pages) size 8" x 13" , dc register (8.5"x13.5") , sg register (8.5"x13.5") , daily generation data register (register of 100 sheet) , generation loss register (register of 100 sheet) , ems of xen store wings , pcb covering letter(pad of 100 sheet) , cos-15 mcn book , store inward register cos -6 , supply bill covering letter , arranging inspection letter , supply completion report(for store use)( , priced srn / sin cover letter , srn book , gate pass book (store) , cos-14 (100 sheet) ledger with index a to z (13.5"x17") , bin cards (small card) (material identification card) size 7.33"x4.67" , cos-23 register (scrap) , cos-14 (200 sheet) ledger with index a to z (13.5"x17") , ems of s.e. operation support wing , control room fans panel log sheet unit-1st/2nd/3rd/4th/5th/6th , control room mill log sheetunit-1st/2nd/3rd/4th/5th/6th , control room steam & water log sheetunit-1st/2nd/3rd/4th/5th/6th , control room turbine panel log sheet unit-1st/2nd/3rd/4th/5th/6th , control room generator panel log sheet unit-1st/2nd/3rd/4th/5th/6th , boiler operating floor (19.5meter) log sheet , id/fd/pa fans log sheet unit-1st/2nd/3rd/4th/5th/6th , mills area log sheet unit-1st/2nd/3rd/4th/5th/6th , boiler feed pump area log sheet unit-1st/2nd/3rd/4th/5th/6th , turbine operating floor / lub oil pump /oil coolers centrifuge log sheet unit-1st/2nd/3rd/4th/5th/6th , condensate extraction pump log sheet , hydrogen seal oil system log sheet unit-1st/2nd/3rd/4th/5th/6th , esp log sheet unit-1st/2nd/3rd/4th/5th/6th , ht (6.6 kv) lt (415 v) switch gear log sheet , cooling tower log sheet unit-1st/2nd/5th , compressor plant log sheetunit-1st/2nd/3rd/4th/5th , compressor plant log sheet unit-6 , 400kv switch yard transformer log sheet , 400kv switch yard log sheet , raw water log sheet stage-1/2/4 , assistant engineer (boiler) log book u#1 to 6 , assistant engineer (ca & elect) log book u#1 to6 , assistant engineer (turbine) log book u#1 to 6 , diesel generator register , ptw book in duplicate (9"x11') , meeting agenda register , ca equipment running hrs. register , raw water running hrs register , boiler/turbine equipments running hours register , tripping register , boiler/turbine/ca & electrical reading register , sadc register , day tank of fuel oil logsheet , 220 kv switch yard logsheet , dmccw system stage- 2nd/3rd/4th log sheet , c.w/a.cw pump house area stage -2nd/3rd/4th log sheet , intake pump house logsheet , shift incharge log book , details of gun clea

State Government

CTN :45475453

10 Jun, 2026 3.00 Lacs

Kota - Rajasthan

Tender For supply of sanitary and joinery items to government quarters located in civil lines. - wire nails, coarse sand (zone iii), fine sand (zone iv), portland cement, oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges75x47x1.70 mm, chromium plated brass handles 125 mm with plate 175 x32 mm, chromium plated brass handles 100 mm with plate 150 x 32 mm, stainless steel butt hinges 125x64x1.9 mm is : 12817 marked, stainless steel butt hinges 100x58x1.9 mm is : 12817 marked, stainless steel butt hinges 75x47x1.8 mm is : 12817 marked, stainless steel butt hinges 50x37x1.5 mm is : 12817 marked, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel door latch 300x20x6 mm, oxidised mild steel door latch 250x20x6 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, glue, ms hold fast, white cement based putty, g.i. limpet washer, bitumen washer, g.i. plain washer thick, c.i. grating 100x100 mm, indian type white glazed vitreous china ist quality w.c. orissa pan size 580x440mm., brackets, low level flushing cistern of 10 litres capacity : pvc with pvc bend as per is : 7231, m.s. clamps, european type white glazed vitreous china ist quality w.c. pan, wvc (10 litres) low level flushing cistern cover only., g.i. tees (equal) 25 mm, g.i. union 15 mm nominal bore, vitreous china flat back wash basin size 510 mm x 440 mm, c.p. brass waste coupling 32 mm, magenatic catcher double strip horizontal type., mortice lock of approved make godrej or equivalent with pair of cp handles, almirah lock of approved make godrej or equivalent, ss waste coupling 125 mm, p.v.c waste pipe with c.p nut 32 mm, p.v.c waste pipe with pvc nut 32 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm)., hydraulic door closer bottle type m.s. body with necessary accessories and screws complete, 6 mm thick commercial ply, 9 mm thick commercial ply, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, flexible (coil shaped) pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 75 mm dia., u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 110 mm dia., upvc coupler for upvc drainage pipes 75 mm, upvc coupler for upvc drainage pipes 110 mm, upvc bend 87.5o 75 mm bend, upvc bend 87.5o 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass angle valve 15 mm, 15 mm ptmt bib cock, p.t.m.t. bib cock with nozzle 15mm, 15 mm ptmt bib cock long body with flange, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt ball cock 15mm complete with epoxy coated aluminium road & h.d. ball, ist qulality mat and glossy finished ceramic tiles size : 300mm x 450mm, ist quality heavy duty vitrified polished digital tile size:600mmx600 mm, ceramic mat finished tiles ist quality size 300 mm x 300 mm in white, gray, ivory, fume red brown, light green, light blue and other light shades, 15 mm nominal bore and 30 cm length pvc connection pipe with p.t.m.t. nuts, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, stainless steel screws 50 mm, stainless steel screws 40 mm, stainless steel screws 30 mm, stainless steel screws 20 mm, premium quality water closet seat cover solid pvc (isi marked) grade-i white for ewc, premium quality low level flushing cistern of 10 litres capacity pvc with pvc bend as per is : 7231, hydraulic seat cover for europeon wc, premium quality two way bib cock with wall flange, tooth paste & brush holder c.p. brass (heavy and superior quality.), stainless steel kitchen s

State Government

CTN :45401867

25 Jun, 2026 3.87 Crore

Jalpaiguri - West Bengal

Tender For re-construction of fulbari bypass removing existing dilapidated road top from the toll gate end to intake well at fulbari, dist. jalpaiguri

State Government

CTN :45456720

08 Jun, 2026 NA

Akola - Maharashtra

Tender For procurement of special designed fly ash evacuation valves and spares for unit#3 annual overhaul of ahp, paras tps. - air intake 200 nb valve assembly, aiv assy with power cylinder, 200 nb valve disc with liner pn 6a & 6b, 200 mm fvlv seat ci (replaceable)(pn 07, 200 mm flap vlv asbestos gasket, 250 nb brnch isol vlv valve body pn2, knife gate plate, esp tecpro sys fluidizing pad , techpro sys aeration pad cloth, techpro sys perforated plate, 200 mm flap vlv aiv spring

CTN :45401891

12 Jun, 2026 NA

Puruliya - West Bengal

Tender For procurement of arv for new intake pipe line and different size of gate valves, check valves for maintenance in different pipelines in plant under tmd,stps - name of supply/work: procurement of arv for new intake pipe line and different size of gate valves, check valves for maintenance in different pipelines in plant under tmd, santaldih t.p.s., the wbpdcl

corporations/Associations/Others

CTN :45449087

20 Jun, 2026 29.10 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of ash intake valve for 1st and 2nd row , 15623-1 disc-gate, 6.5 inch od x 0.5 inch thk, dh, mach , k-18302-1, disc-5 inch mach , 170070-2, 8 inch-tee out let, durite , adapter 10 inch bev end dc , adapter 10 inch bev flg dc

Mild Steel Door Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government

corporations/Associations/Others